Commercial Roofing in Meridian, Idaho

Meridian Quality Roofing handles commercial roofing in Meridian on low-slope boxes, shops, and small retail along the valley corridors. TPO, EPDM, remaining BUR, and metal are the usual systems. Larger squares still start with a walk of drains and units, not a house shingle speech.

Call (208) 759-1550 with the address type, the membrane if you know it, and whether tenants stay open. We look at cores and copings before a recover number is real.

Commercial Roofing Options for Meridian Properties

TPO and EPDM sheets on retail and shop boxes

White TPO reflects this sun. Black EPDM is still on older boxes. Seams, flashings at units, and ponding at clogged drains are the failure list. We weld or glue to the system that is there, or we strip to a dry deck and hang new sheet.

Built-up gravel and modified bitumen remaining

Torch-down and gravel BUR still sit on some schools, shops, and older strips. Blisters, alligatoring, and wet felts change the repair. A patch on a cooked cap sheet is short. A core tells us if the insulation is already a sponge.

Parapet copings, scuppers, and unit curbs

Most commercial leaks are at the edge or the unit, not in the middle of a clean field. Copings that dumped water behind the parapet, scuppers that rusted, and curb flashings that split get named first. Field sheet is the easy part once edges are honest.

Occupied scheduling, night dry-in, and alley access

A dumpster in a lunch rush on Eagle Road is a different job than a vacant box. We stage tear-off, interior protection at units, and night dry-in when the lease needs it. The bid includes access, not just membrane.

How We Handle Commercial Roofing in Meridian

1. We walk drains, copings, units, and the field. Ponding maps get photos.
2. We core or moisture-map when the sandwich is unknown. Wet ISO does not get a recover.
3. We write recover, tear-off, or a local repair at a curb. Square count is roof area, not tenant square footage.
4. We schedule around occupancy, then dry-in each day's opening. Low-slope cannot sit open overnight in a rain window.
5. We flood-test drains and check copings before we call it closed.

Materials and Methods

Low-slope work uses TPO, EPDM, or modified bitumen over cover board and insulation, with tapered ISO where ponding is chronic. Fasteners and plates, or fully adhered sheets, depend on the deck: steel, wood, or concrete. Termination bars, pourable sealer at irregular penetrations, and metal copings close the edges.

NRCA and manufacturer application instructions govern seams and laps. Those documents are trade specs. They are not a plaque this brand claims. Walk pads at units keep traffic off the sheet. We do not run HVAC. We flash what the mechanical trade leaves.

What Commercial Roofing Costs in Meridian

Thumbtack publishes rubber EPDM at $14,165 to $18,825 on a 2,500 square foot roof. Fixr publishes metal at $14,000 to $38,400. Larger boxes scale by squares, height, and wet insulation. A recover is not a tear-off. Occupied night work is not a vacant Saturday. Call for a quote after we know the sandwich and the access.

Meridian commercial squares cluster on Chinden, Fairview, and Eagle Road more than in a cul-de-sac. A shop in a south plat is still a membrane if the pitch is low. Rooftop HVAC curbs, gas lines, and satellite trays are penetrations. We flash what is there. We do not move units. Interior protection under a tear-off on an occupied box is plastic at the unit and a plan for dust at the deck. Steel decks take fasteners and plates. Wood decks take a different pull-out. Concrete wants adhered sheet. We name the deck in the scope so the square price is not a house shingle number wearing a commercial hat.

Commercial Roofing Questions

What commercial roofing systems do you work on here?

TPO and EPDM on retail and shop boxes, remaining BUR and modified bitumen, and metal on some warehouses. Parapet copings, scuppers, and rooftop units are part of that look. Steep shingle on a small office is still a shingle job, named as such.

Can you work around open tenants?

Yes. We plan tear-off, noise, and dumpsters around hours. Night dry-in happens when the space cannot take a noon dumpster in the alley. Access from Chinden or Fairview lots is part of the scope, not an afterthought.

Do you core a low-slope roof?

When we need to know wet insulation, we core or use moisture mapping. A photo of the cap sheet does not show a wet ISO layer. We patch cores. We do not guess a recover over wet foam.

What do published guides say commercial-scale roofs cost?

Thumbtack lists rubber EPDM at $14,165 to $18,825 for a 2,500 square foot roof. Fixr lists metal at $14,000 to $38,400. Larger commercial squares scale from there. Recover versus tear-off and wet insulation move the number more than the brand of membrane.

Is a recover cheaper than a tear-off on a box?

A recover is faster when the existing is dry and the code allows the extra layer. Wet insulation under a recover fails the new sheet. We say recover or tear-off after we know the sandwich, not from the parking lot.