TPO Roofing in Meridian, Idaho

TPO roofing options for Meridian properties.

New TPO on an addition.

A low-slope family-room lid that leaks at the wall. Cover board, membrane, wall flashing.

Recover over a sound old field.

If the old membrane is dry and attached, a recover can work. Wet insulation has to come out.

Tear-off to deck, new TPO.

When the old system is soaked. Heavier. Honest.

Commercial box, TPO field and parapets.

Retail or a shop on Chinden. Scuppers, copings, night work. The commercial page is the family. This is the membrane name.

How we handle TPO roofing in Meridian.

1. We walk drains, seams, and parapets.
2. We probe for wet insulation.
3. We write recover versus tear-off, mil thickness, and flashings.
4. We weld the field and detail walls and pipes.
5. We flood-test drains when we can and leave you a welded membrane.

Materials and methods.

TPO is a white thermoplastic membrane, often 45 to 80 mil, mechanically attached or fully adhered, seams heat-welded. Cover board under it is common. Insulation if the energy spec wants it. Term bars at walls. Pipe boots that weld.

A national commercial sheet listed full TPO reroof around $9 to $13 per square foot in one storm-restore example. Residential additions are a smaller square count with more wall detail per foot. We quote the box.

Valley notes: UV on a white TPO is why people pick it. Ponding on a poorly sloped addition is why they leak. We still need fall to a drain. A flat lid with no taper is a pond. We say that.

We do not hang TPO on a 6:12. Shingles or metal belong there. A porch lid at 1:12 is TPO country.

The connected contractor holds registration. Night work on a retail box is a line so the store can open.

Valley notes: a 400-square-foot patio cover with a 1:12 and a wall leak is a small TPO with a lot of flashing per foot. A 40-square shop is a field. Those are different bids. Ponding at a clogged scupper is maintenance. We can weld a new scupper. We cannot visit every fall to pull leaves unless you hire that.

White TPO shows dirt. It also shows a bad weld. That is a feature. Black EPDM hides both. You pick. Walk pads at HVAC are a line so the next tech does not punch the field. If a unit sits on sleepers that have crushed the old membrane, we talk sleepers before we weld a pretty sheet that will crush again.

Interior leaks on a low-slope often track 10 feet. We do not patch the stain. We walk the roof. A hose test is a tool. A guess from the living room is not. Keep HVAC techs off a new weld for a day. A boot on a warm seam is a wrinkle. We can leave walk-pad arrows. Ask. A new curb for a unit is a metal shop and a weld, not a smear of mastic. If the unit is moving, say so before we buy the sheet. Extra patches after a unit shuffle look like a quilt. Keep foot traffic to the pads. A sharp stone in a work boot is a puncture we will not see until the next rain. We can leave extra membrane for a future curb. Ask. A leftover roll in the mechanical room is cheaper than a custom patch later. Mark it. Unmarked white TPO in a closet looks like trash and gets tossed. Write TPO and the date on the roll with a marker. Future you will thank present you. A date on a roll is not a warranty speech. It is a way to know what membrane is on the roof when the next leak shows, so the next crew is not guessing at the sheet.

What TPO roofing costs in Meridian.

Per-square-foot commercial examples around $9 to $13 show up on national storm sheets. Insulation, tear-off, and wall length move the bid. We quote the box.

Call (208) 759-1550 if the roof is low-slope and you want a welded membrane.

TPO on Meridian low-slope shops and additions

TPO roofing belongs on low-slope additions, shop lids, and small commercial boxes, not on a 6:12 production house. White membrane reflects this sun. Heat-welded seams and welded boots are the system. Ponding on a patio cover with no taper is why additions leak at the house wall. We still need fall to a drain or scupper. A flat lid with no drainage plan is a pond, and a new sheet will not invent slope by itself.

Freeze-thaw shows at drains and wall flashings when ice and debris block outflow. Valley wind matters less as tab lift and more as abused edge metal and open term bars. Recover over dry, attached membrane can work. Wet insulation has to come out. Shops along Chinden and Fairview often mix TPO fields with metal on higher bays. Say which plane leaks. Walk pads at HVAC keep the next tech from punching a new weld.

Night work on a retail box is a scheduling line when the store must open at dawn. A 400-square-foot patio lid with long wall flashings is not priced like a 40-square shop field. We count wall length and penetrations with the squares.

We do not hang TPO on a steep shingle house. Architectural laminate and standing seam own those pitches. This page is welded membrane on a low slope with honest drains.

Call (208) 759-1550 with shop, addition, or retail, and a photo of the drains. We walk seams, parapets, and wet insulation clues before we weld.